Page 55 - OHS, July/August 2020

handling, and assembly operations.”
As can be seen, this standard covers the testing and marking re- quirements for many hazards found in the workplace environment. Another major component of the standard is found in Section 2.3 Application. Specifically referring to Paragraph 2.3.2, any eye and/
or face protection equipment that bears the Z87 permanent mark:
“Shall meet all applicable requirements of this standard
in its entirety. All components of eye and face protectors shall comply with the requirements of this standard. Accessories in- stalled by the manufacturer shall not cause the protector to fail the requirements of this standard.”
The paragraph goes on to require that, “Manufacturers of com-
ponents, aftermarket components, accessories and complete pro- tectors shall ensure that all required tests have been performed to demonstrate conformance.”
In short, any additional components and accessories, including aftermarket parts, must be tested under the Z87.1 standard. If the markings are not present, the equipment has not been tested and approved for use. This includes any accessories available. It also in- cludes any eye and face protection equipment used in conjunction with head protection gear as well.
What Are the Responsibilities of an End User?
According to Paragraph 2.3.3 of the standard, it cannot always be assured that compliance with the standard is met when accessories
are added, or should components be replaced. Therefore, it’s the end user’s responsibility to select and install components to ensure compliance with the standard.
Additionally, Paragraph 2.3.4 requires that non-compliant components or accessories shall not be used with ANSI/ISEA Z87.1 compliant equipment.
Wearing properly tested and classified eye and face protection that is intended to work as a system with your hard hat is key to helping you and your employees stay safe on the jobsite. Don’t take chances on using safety equipment not designed for your specific work environment and potential hazards.
Make sure you perform your hazard analysis to choose your eye and face protection equipment based on and in compliance with OSHA regulations. Use gear that’s compliant with ANSI/ISEA Z87.1—American National Standard for Occupational and Educa- tional Personal Eye and Face Protection Devices.
Dennis Capizzi is the Industrial Segment Marketing Manager for Head, Eye, Face and Hearing Protection at MSA, and has been work- ing in the PPE industry for over 12 years. He obtained his undergrad- uate degree in Marketing and Business Management from Clarion University of Pennsylvania in 1997 and his MBA from the University of Pittsburgh in 2015. He has authored/co-authored numerous arti- cles on the dangers present in the workplace and how to best mitigate these dangers.
• CLASS I, DIV. 1 SAFETY RATED PORTABLE SCENE LIGHT/ LANTERN WITH FAR-REACHING BEAM
• DEVELOPED FOR WORK IN HAZARDOUS LOCATIONS
• WATERPROOF, COMPACT, LIGHTWEIGHT AND RECHARGEABLE
• BACKED BY OVER 45 YEARS OF COMMITMENT TO THE FIRE AND INDUSTRIAL MARKETS
© 2020 STREAMLIGHT, INC. | STREAMLIGHT.COM
STR10135_Vulcan180-Div1-OHS-HALF.indd 1 Circle 61 on card. 6/25/20 2:27 PM wwwU.notihtlesdo-3n3lin1e.com JULY/AUGUST 2020 | Occupational Health &6/2S6a/2f0ety8:03 AM49