Page 86 - OHS, September 2022

PPE: FALL PROTECTION
Six Tips for Where,When and How
to Choose and Use Self-Retracting Lifelines
SRLs are designed to help you focus on the job, not your PPE.
BY DENNIS CAPIZZI
For many workers, working on top of an elevated surface or structure is a daily actuality or eventuality. It’s also some of the most hazardous
work on the planet.
Despite efforts to raise awareness of
the inherent danger of at-height work and the continual training of workers on safety best practices, falls from elevation are still the leading cause of death for construction employees.1 In 2020, more than one in five workplace deaths occurred in the construction industry. Just over one-third of the deaths in this industry were due to falls, slips and trips and were almost entirely from falls to a lower level.2
Such numbers bring awareness to the importance of selecting appropriate fall arrest solutions. Here are six tips for where, when and how self-retracting lifelines (SRLs) should be deployed for vertical fall arrest protection.
Understanding the
Hierarchy of Fall Protection
Safety advancement is already in the works, of course, with many employers taking their safety programs to the next level. Next-level safety planning should include an understanding of the hierarchy of fall protection.
The following four-part hierarchy is a recommended starting point to determine which approach and fall protection system is best for the job and the worker.
Elimination. Obviously, this is the preferred solution to all fall hazards. Although elimination is not always possible, don’t overlook the fact that there is some control in identifying potential hazards and adjusting processes and procedures accordingly.
Passive Fall Protection. This involves the use of physical barriers, such as guardrails, around unprotected edges. OSHA recommends in 29 CFR 1926.502(j)(5) that guardrail systems be used to prevent falling objects that can pose a hazard to workers.3
Fall Restraint Systems. Using PPE to restrict the worker’s range of access, fall restraint systems are erected in an attempt to prevent the worker from physically traveling to the fall hazard.
Fall Arrest Systems. These work to stop the fall within acceptable force and clearance margins, leaving the worker to be rescued according to Safety Program procedures.
Recognize When and Where
to Use Self-Retracting Lifelines Another example of advancing fall prevention and protection is the growing trend of replacing lanyards and rope grabs with self-retracting lifelines (SRLs) as the safety standard. Like those two fall protection methods, SRLs are intended to reduce workplace injuries and fatalities from falls.
SRLs, however, are different in many ways than lanyards and rope grabs. SRLs are fast-acting fall arresters that limit free- fall distance and decelerate distance and fall arrest forces. Some SRL designs even allow the user freedom of movement. In addition to all those safety benefits,
when compared with lanyards and rope grabs, SRLs typically last longer, retract on movement, offer faster lock-on and are easier to store.
Know How SRLs Work to Arrest Falls
SRLs offer dependable fall protection and are specifically designed to allow the wearer to have hands-free fall protection. Here’s how they work:
■ A synthetic line or metallic cable is attached to the worker’s harness.
■ This cable automatically extends and retracts from a floor or overhead anchored (stationary unit) while the worker moves about the jobsite.
■ In the event of a sudden fall, the SRL locks on to the anchored unit, arresting the force of the fall.
■ An energy absorption system automatically kicks in to limit the impact of the force on the worker’s person.
Consider the Environment
and Application
There are numerous situations where fall protection is necessary. So, it’s important
82 Occupational Health & Safety | SEPTEMBER 2022
www.ohsonline.com