Page 23 - Occupational Health & Safety, November 2018

SLIP & FALL
Incorporating Floor Safety into Other Routine Inspections
Establishing procedures for routine cleaning in production areas can help to maintain workspaces, storage rooms, and fluid dispensing areas. It also
can make annual “spring cleanings” less time consuming.
BY KAREN D. HAMEL Conducting routine inspections is a require- ment in many OSHA and EPA regulations. Managing slip, trip, and fall hazards is no exception. Employers are required to rou- tinely inspect all walking-working surfaces in their fa- cility to identify and remedy slip, trip, and fall hazards. Because slips, trips, and falls can happen anywhere, chances are good that many of the areas where they could occur are routinely inspected to meet other reg- ulations, or they are checked regularly for other rea- sons. Adding floor safety inspection elements to those existing inspections or routine walkthroughs can save time and prevent the need to add another checklist to
the pile of inspections that need to be done.
Production Areas
Maintaining clean work areas is proven to improve both safety and production. Floors that are clear of clutter, cords, leaks, drips, and spills help to prevent slip, trip, and fall incidents. In facilities with floor drains that empty directly to storm drains, clean and dry floors also help to minimize the release of pollut- ants to waterways.
OSHA’s housekeeping and sanitation regula- tions require workplaces to be maintained and kept orderly. Establishing procedures for routine clean- ing in production areas can help to maintain work- spaces, storage rooms, and fluid dispensing areas. It also can make annual “spring cleanings” less time consuming.
Facilities that must comply with EPA Stormwater Regulations need to implement best management practices that prevent pollution, such as sweeping or vacuuming areas to remove solid particles from surfaces and promptly cleaning up liquid spills. Best practices that help to satisfy these requirements may also help to keep walking surfaces clean, dry, and safe.
There is no specific requirement to perform house- keeping or sanitation inspections. However, most fa- cilities do have procedures to ensure that each work area is cleaned regularly. Floor safety elements such as sweeping or mopping floors, regularly removing wastes, getting rid of obsolete or unnecessary items, and organizing tools and supplies will help to satisfy all of these regulations. Procedures also should in- clude requirements for all employees to quickly clean up small leaks and spills so that they do not pose slip and fall hazards.
Outdoor Areas
OSHA’s Walking-Working Surfaces Standard extends beyond the walls of the facility. Employees must also have safe access to and egress from each walking- working surface [29 CFR 1910.22(c)].
Keeping parking lots, sidewalks, and outdoor common areas free of ice, snow, and fallen leaves are some of the common maintenance tasks that will help to ensure compliance and minimize slip and fall haz- ards in these areas. Pruning shrubs and keeping land- scaping features out of walkways also will help avoid tripping hazards.
Whether these tasks are contracted services or performed in-house, work with maintenance staff to ensure that outdoor areas are level and free of holes or cracks that could lead to injuries. There should also be a plan for maintaining walking surfaces in bad weather that includes the tools, supplies, and person- nel necessary to keep parking lots and sidewalks clear before, during, and after business hours.
Bulk Tank Unloading Areas
Aboveground and underground storage tanks allow large volumes of materials to be stored and managed safely. Because both aboveground and underground storage tanks have specific design requirements, the chance of catastrophic failure is slim. When either above or underground tanks are used to store hazard- ous materials, they are governed by EPA regulations that require regular inspections.
The greatest chance for leaks and spills that can cause slippery walking surfaces is during bulk deliver- ies. Slip and fall hazards also can exist when deliveries need to be made in rainy, snowy, or icy conditions.
Facilities with tanks and facilities that are subject to EPA’s Stormwater or SPCC regulations must have procedures in place to minimize the chance of en- vironmental harm. Including procedures for main- taining these areas during bad weather and quickly cleaning up leaks and spills that occur during fluid deliveries will help to maintain walking surfaces in these areas and minimize the chance of slips and falls.
Waste Collection Areas
At home, not many people enjoy the task of taking out the trash. At work, not many are eager to spend time hauling trash and other wastes to the collection areas, let alone spend much time in or around these areas.
www.ohsonline.com
NOVEMBER 2018 | Occupational Health & Safety 19